Design and construction of individual heat point

Status: Completed

Object: -

Location: Chișinău, Moldova

Publication date: 15.12.2023

Design, construction and commissioning of three steam boiler rooms and 13 heat points of the Republican Hospital, Cancer Institute and the Center for the Rehabilitation of Children. The project was funded by the World Bank in the amount of $ 5 million.

Individual heat point in the Republican Clinical Hospital.

Installation of a 900 kW block heat point for the needs of the hot water supply of the laundry room and the pathological department of the RCH department:

  • Overall dimensions of the block heat point: 1450 x 800 x 2100;
  • Heat point weight: 860 kg;
  • Condensate tank: 430 liters based on the volume of the system 10-15 minutes.

The main equipment of the block heat point:

  • Two brazed steam-water heat exchangers type CB 76-20l;
  • Two brazed steam-water heat exchangers for condensate heat recovery, type CB 27-24l.

Installation of a block steam heat point with a capacity of 1790 kW for the needs of hot water supply for cardiology of the administrative building of the Republic of Belarus, zone No. 1:

  • Overall dimensions of the block heat point: 1450 x 800 x 2100;
  • Heat point weight: 860 kg;
  • Condensate tank: 1000 liters based on the volume of the system 10-15 minutes.

The main equipment of the block heat point:

  • Two brazed steam-water heat exchangers type CB 76-30l;
  • Two brazed steam-water heat exchangers for condensate heat recovery, type CB 76-30l.

Installation of a block steam heat point with a capacity of 1790 kW for the needs of hot water supply for cardiology of the administrative building of the Republican Clinical Hospital, zone No. 2:

  • Overall dimensions of the block heat point: 1450 x 800 x 2100;
  • Heat point weight: 860 kg;
  • Condensate is drained into the tank from the heat point in zone No. 1.

The main equipment of the block heat point:

  • Two brazed steam-water heat exchangers type CB 27-24l;
  • Two brazed steam-water heat exchangers for condensate heat recovery, type CB 27-10l.
Other projects